Panasonic DVD-LA85 - Manuel (Page 9)

Disc and unit handiing precautions
Concerning discs
Do not use irregularly shaped discs, such as
heart-shaped. (These discs can damage the
unit.)
■ How to hold a disc
Do not touch the recorded shiny surface.
Wipe it with a damp cloth and then wipe dry.
Wipe from the center toward the circumference.
■ If the disc is brought from a cold to a warm
environment, moisture may form on the
disc
Wipe with a soft, dry, lint-free cloth before using
the disc.
■ Handling precautions
• Do not write on the label side with a bail-point
pen or other writing instrument.
•Do not use record cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
• Do not use scratch-proof protectors or covers
other than those specified for use with this unit.
•Do not attach labels or stickers to discs.
• Do not use discs with exposed adhesive from
tape or left over peeled off stickers.
•Do not use discs printed with label printers
available on the market.
■ Do not place or store discs in the following
places
•Locations exposed to direct sunlight
• Humid or dusty locations
• Locations directly exposed to the heat from a
heating appliance
To prevent damage
Avoid the following;
•Spraying flammable insecticides near the unit,
• Pressing the LCD,
•Touching the lens and other parts of the laser
pickup.
Do not use the unit in the following places:
• Sandy places such as beaches,
•On top of cushions, sofas, or hot equipment
such as amplifiers.
Do not rest the unit on your lap for a long time
while using it. The unit can become hot and
cause burns.
Maintenance
■ To clean this unit, wipe with a soft, dry
cloth.
If the surfaces are extremely dirty, use a soft
cloth dipped in a soap-and-water solution or a
weak detergent solution.
• Use eyeglass cleaner to remove stubborn dirt
from the LCD.
• Never use alcohol, paint thinner or benzine to
clean this unit.
• Before using chemically treated cloth, read the
instructions that came with the cloth carefully.
■ Maintenance of the lens
• If dust is attached to the lens, remove dust
carefully with an air blower for camera lenses
(optional).
•Be careful not to touch the lens with your fin­
gers.
fl0T5602