Speaker settings screen for multi-channel, O type of speakers to be connected, O output balance – Panasonic DVD-LA85 Manuel d'utilisation
Page 39: 1 select “test” and press [enter, 2 press [enter
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

speaker settings screen for Multi-channel
O Center
O
Front(L)
Exit
Test signal
O Surround (L)
O Surround (L)
O Center
O Surround
O Center
O Front (R)
O Subwoofer
O
Subwoofer
O Surround (R)
O Surround (R)
O
Type of speakers to be connected
• Front (L/R)
: Large/Small
•Center
: Large/Small/No
•Subwoofer
: Yes/No
•Surround (L/R):
Large/Small/No
Example: surround speaker (L)
Large Small No
aiJiP ■
é
p*ii« • I ,1 I
m
№ ® CJ
“Large” speakers are capable of reproducing sounds under 100 Hz. “Small” speakers are
any other type.
O Delay time
(Dolby Digital DVD-Video, center/surround channel only)
The optimum position for speakers is to arrange them in a circle as shown. If you cannot do
this, changing the delay time can make up for differences in distance.
Distance A=Distance F-Distance C Distance B=Distance F-Distance S
Distance A
Delay time
Approx. 50 cm (1 Vi feet)
1.3 ms
Approx. 100 cm (3 feet)
2.6 ms
Approx. 150 cm (5 feet)
3.9 ms
Approx. 200 cm (6 teet)
5.3 ms
Distance B
Delay time
Approx. 200 cm (6 feet)
5.3 ms
Approx. 400 cm (12 feet) 10.6 ms
Approx. 600cm(18feet)
15.9 ms
O
Output balance
1 Select “Test” and press [ENTER].
A test signal is output from one speaker at a time, starting with the front left speaker and
proceeding clockwise.
Use the cursor jockey
[ A ,
▼] to adjust the volume of the center and surround speakers
so they are the same apparent volume as the front speakers.
2 Press [ENTER].
The test signal stops.
•There is no test signal output for the subwoofer. Play a source to check the level, then re
turn to this screen to adjust the volume if necessary.
RQT5602