Panasonic DVD-LA85 - Manuel (Page 13)

bVD-A
I
DVD-Vli VCD J SCDl
■ To turn the unit on
The unit can be turned on as follows.
<On the main unit>
o^cfFll |. II .1 ilHOB Slide [ON/OFF, HOLD] to
“ON/OFF” until the display
is turned on.
<On the remote control>
Press [C!), POWER].
©
The [cl>] indicator on the unit flashes to indi­
cate the unit is on when the monitor’s mode
is set to “4 (Off)” page 23) or the disc lid
is closed.
■ To turn the unit off
The unit can be turned off as follows. The
[c!)j indicator lights when you are using the
AC adaptor.
<On the main unit>
owff I i h II >.| iinou) Slide [ON/OFF, HOLD] to
“ON/OFF” until the display
is turned off.
<On the remote control>
Press [C!), POWER],
©
•You cannot use the remote control to turn
the unit on when it is being powered by
the battery pack.
•The unit automatically turns off after being
stopped for 15 minutes (5 minutes when
the battery pack is being used) to save
power. (Auto power-off function)
■ To prevent accidental operation
wwf II II >1 ||mu) Slide [ON/OFF, HOLD] to
“HOLD”.
In the hold mode, the unit does not respond
when you press the buttons. If you press a
button in the hold mode,
¡¡j” appears
on the unit’s display and the [c!)] indicator
flashes.
To release:
Slide [ON/OFF, HOLD] to “ON/OFF”.
Sapping play
During play
Press [■].
The position you stopped play at is record­
ed by the unit when is flashing on the
unit’s display.
Flashes ■
While is flashing on the unit’s display,
press [►] to start play from where you
stopped it (Resume function).
If you are playing DVD-Video, the following
display also appears.
Pressing [►] while this is displayed acti­
vates the Chapter Preview feature.
If you do not press [►], the message dis­
appears and play starts from where you
stopped it.
Chapter Preview:
The beginning portions of each chapter up
to the current one are played. Full play re­
sumes from the point where you stopped
play. (Chapter Preview feature works only
within a title.)
■ To cancel Resume function
Press [■].
•The DVD-Audio group is stored.
•The resume function does not work if the
disc’s play time is not displayed.
•The resume position remains in memory
even if the unit is off.
•It is cleared if you open the disc lid.
RQT5502