Panasonic DVD-LA85 - Manuel (Page 10)

Preparing the remote
control
^1 Insert the
(Lithium battei^j
■ Replacing the button-type battery
The battery normally lasts for about a year.
Replace if the remote control falls to operate the
unit when used within the operation range.
Refer to “PRECAUTIONS” on pages 6 and 7.
Operation range
Remote control
signal sensor
About 7 m
(23 feet) in front
of the signal
sensor
• Do not expose the remote control signal sensor
to bright light.
• Do not place obstacles between the remote
control signal sensor and the remote control.
•Do not use another unit’s remote control at the
same time.
Power supply
Using the AC adaptor
Front of
this unit
Refer to “PRECAUTIONS" on page 6.
The unit is in the standby condition (the
[c!>] indicator lights) when the AC power
supply cord is connected. The primary
circuit is always “live” as long as the AC
adaptor is connected to an electrical
outlet.
RQT5602
■ When the unit is not going to be used
for a long time
The unit consumes 2 W when in standby
mode.
To conserve power, disconnect the AC
power supply cord from the AC outlet.