Panasonic SA-HE200 EN - Manuel (Page 7)

Antennas
FM indoor antenna (included)
Adhesive tape Fix the other end of the
antenna where reception
is best.
AM loop antenna
(included)
Using the stand
Attach to the stand and place on a flat surface.
[
20 mm (25/32")
I- - - -
Shield braid
10 mm (3/8")
Core wire
FM outdoor antenna
• Disconnect the FM indoor antenna.
• The antenna should be installed by a competent
technician.
• Twist the coaxial cable’s shield braid firmly and
connect it to the GND terminal.
FM outdoor antenna
75 Í2 coaxial cable
AM antenna stand (included)
When attaching the AM loop antenna to another
surface bracket
Mi
(included)
^ Screw
Keep the antenna cord away from tape decks, DVD
players, and other cords.
AM outdoor antenna
• Run a piece of vinyl wire
horizontally across a window or
other convenient location.
• Leave the loop antenna
connected.
• Disconnect the antenna when
the unit is not in use. Do not
use the antenna during an
electrical storm.
AM loop antenna
(included)
(16^0 ft)
Connecting the AC poyver supply coixl and^o^ Information
CAUTION:
TO PREVENT ELECTRIC SHOCK
MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
AC power supply cord
(included)
Household AC outlet
(AC 120 V/60 Hz) Connect this cord after
all
other cables and
cords are connected.
The cooling fan operates at high power^
output levels only.
,
The included AC power supply cord is for use with
this unit only. Do not use it with other equipment.
“SWITCHED ’ AC outlet
Power to the outlet is controlled by the
power switch of this unit. Audio
equipment rated up to a maximum of
80 W can be connected here. If
equipment
exceeding this rating is
connected, the outlet may be rendered
noperable. Consult your dealer to
replace the fuse.
Conserving power
The unit consumes 1 W even when it is turned
off with [POWER, */)]. To save power when
the unit is not to be used for a long time,
unplug it from the household AC outlet.
If the unit is left unplugged for longer than a
few weeks, all settings will revert to the factory
settings. Do the settings again if this occurs.
RQT6250