Panasonic SA-HE200 EN - Manuel (Page 12)

o; ì)
Control guide
Main unit
[ENHANCED SURROUND] |
For turning on the enhanced surround mode. The indicator lights
when the mode is on. ____ ____ _____ _____
[HQ SOUND MODE]
For selecting the HQ sound mode. The indicator lights when the
mode is on.
[RE-MASTER]
For selecting a re-master mode. The indicator lights while a re-
master mode is on. ___________ _ _
^ _________
[[SOURCE DIRECT]
I
For selecting a source direct mode.
[Remote control sensor____ __ ___ _____
TPOWEIVivl]
Press to switch the unit from on to standby mode or vice versa.
In standby mode, the unit is still consuming a small amount of
power.
[DSP SOUND MODE]
For selecting “STEREO”, “SURROUND" or “SFC”
[DOLBY PRO LOGIC H]
For selecting a Dolby Pro Logic D mode: MOVIE, MUSIC or
PANORAMA.
Use when “DOLBY PRO LOGIC II ” lights in the SURROUND mode.
[PHONES]
Headphone jack
Plug type: 6.3 mm (1/4") stereo
Avoid listening for prolonged periods of time to prevent hearing
damage.
Turn the speakers off when using the headphones.
[SPEAKERS, A, B]
! For selecting speakers A or B.
I Turning the speakers off automatically engages the STEREO
! mode (when listening through headphones, for example),
I If your speakers have an impedance under 6 O
i Press and hold [A] or [B] until “LOW IMP" lights up on the display.
Note that when “LOW IMP” is on, SPEAKERS A and B cannot be
used at the same time.
l[NEO:6]
I For selecting a DTS NEO:6 mode; CINEMA or MUSIC.
I
Use when “NEO;6" lights in the ENHANCED SURROUND mode.
[INPUT MODE]
For selecting AUTO, ANALOG or DIGITAL.______ ___ ___
[DVD6C h 1 n >UT] ~
For switching between 6-channel and 2-channel DVD input.
When you select DVD 6CH, SOURCE DIRECT is on.
Basic òpèraf/
0
rtf [
2 Turn
SPEAKERS A
on.
A SPEAKERS B
czn.v.v.v;
►
HQT6250