Display, Khz, mhz, Low imp, speakers q, id – Panasonic SA-HE200 EN Manuel d'utilisation
Page 14: General display, Over, L, c, r, s, sl, sb, sr, lfe, Tuned, stereo, mono, ¡si, Fixed, pcm, dts, Sound mode, stereo,' surround, sfc, Tape monitor
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Control guide
Display
[ATT]
Lights when the A/D attenuator is working.
[kHz, MHz]
Frequency unit indicators
kHz:
AM, or PCM sampling frequency
MHz:
FM
[LOW IMP, SPEAKERS Q, ID]
speaker indicators
I
LOW IMP:
You have switched to LOW IMP because you have '
connected speakers with an impedance under 6 ii.
SPEAKERS
□: Sound is output from speakers connected to
the front A, surround, and center terminals.
I SPEAKERS [0:
Sound is output only from speakers connected |
:
to the front B terminals.
^
SPEAKERS □ ID:
Sound is output from speakers connected to i
the front A and B terminals.
'^General display
Shows the Input mode, radio frequency, and
other general Information.
[OVER]
Lights when input exceeds rated values.
Turn the A/D attenuator on if this occurs frequently (■
page 20).
IW iWf
l/l\l l/l\l l/l\l l/l\l l/l\l
iwi iwi lil
н/н\н i / i M •-.r
¡]!¿i
imi imi imi
ATT
kHz
MHz
[L, C, R, S, SL, SB, SR, LFE]
Program format indicators
Show the channels contained in the digital input
signal. They do not light when input is analog. ■
L; Front left channel
C: Center channel
R: Front right channel
S: If the surround channel is monaural.
SL: Surround left channel
SB: Surround back channel
SR: Surround right channel
LFE (Low Frequency Effect): Deep-bass effect. i
inic
1
1 S
SL II SB
SR
I
lfe
LOW IMP m
■ ^SPEAKERS
o o
TUNED
STEREO
MONO
^OVER FIXED PCM
yHTAPE MONITOR I ^iPFCT 1 ? DTS
[TUNED, STEREO, MONO,
¡Si]
; Radio indicators
!
TUNED;
A station is tuned.
; MONO:
You have switched to monaural mode with [FM MODE] to i
;
improve reception.
I STEREO:
A stereo FM broadcast is tuned.
IS]: Flashes during presetting.
HNPUT
MODE-
DIGITAL ANALOG
__ ______
-SOUND MODE- SFC
STEREO SURROUND
[FIXED, PCM, DTS]
Light when a fix mode is selected.
FIXED PCM:
PCM FIX mode
FIXED DTS:
DTS FIX mode
[SOUND MODE, STEREO,'
SURROUND, SFC]
Show the current DSP sound mode.
[DIRECT 1 2]
Lights when a source direct mode is selected.
[INPUT MODE, DIGITAL, ANALOG]
Input mode indicators
[TAPE MONITOR]
Lights when the tape monitor is on.
Manufactured under license from Dolby Laboratories.
“Dolby", “Pro Logic" and the double-D symbol are trademarks of
Dolby Laboratories.
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and
other world-wide patents issued and pending.
“DTS",
“DTS-ES
Extended
Surround"
and
“Neo:6"
are
trademarks of Digital Theater Systems, Inc. Copyright 1996,
2000 Digital Theater Systems, Inc. All rights reserved.
RQT6250