Specifications онгтв), Maintenance – Panasonic SA-HE200 EN Manuel d'utilisation
Page 23
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Specifications онгтв)
m
AMPLIFIER SECTION
Rated minimum sine wave RMS power output
20 Hz-20 kHz both channeis driven
0.05 % total harmonic distortion
100 W per channei (6 Q)
1 kHz continuous power output both channels driven
0.05
% total harmonic distortion
105 W per channei (6 Ci)
Total harmonic distortion
rated power at 20 Hz-20 kHz
0.05 % (6
haif power at 1 kHz
0.03 % (6
Q )
Power bandwidth
both channeis driven,
-3
dB
10 Hz-100 kHz (6 ii, 0.9 %)
Power output each channel driven
0.9 % total harmonic distortion at 1kHz,
Front (UR)
Center
Surround (UR/BACK)
Low frequency damping factor
Load impedance
Front (UR)
A or B
A and B
Center
Surround (UR/BACK)
Frequency response
PHONO
RIAA standard curve ±0,8 dB
CD, CD-R/RW, TV, DVD/DVD 6CH, VCR 1, DVR/VCR 2,
VCR
3,
TAPE
10 Hz-100 kHz, ±3 dB
Input sensitivity
PHONO
0.4 mV (3 mV, IHF ’66)
CD, CD-R/RW, TV, DVD/DVD 6CH, VCR 1, DVR/VCR 2,
VCR
3,
TAPE
27
mV (200 mV, iHF ’66)
Input impedance
PHONO
47 ki2
CD, CD-R/RW, TV, DVD/DVD 6CH, VCR 1, DVR/VCR 2,
VCR 3, TAPE
22 kfl
S/N (IHF A)
PHONO
80 dB (80 dB, IHF *66)
CD, CD-R/RW, TV, DVD/DVD 6CH, VCR 1, DVR/VCR 2,
VCR
3,
TAPE
83dB(100dB, IHF’66)
SOURCE DIRECT/HQ SOUND MODE
90 dB (108 dB, IHF A'Rated Power/S=2 V)
Tone controls
BASS
50Hz,+10tO-10dB
TREBLE
20 kHz, +10 to -10 dB
Subwoofer frequency response (-6 dB)
7-200 Hz
130 W (6 П)
130 W (6 П)
130 W (6 Cl)
45 (6 Cl)
4-8 Cl
8C1
6-8 Cl
6-8 Cl
Digital input
(OPTICAL)
4
(COAXIAL)
1
Digital output
(OPTICAL)
1
■ FM TUNER SECTION
Frequency range
Sensitivity
50 dB quieting sensitivity
MONO
STEREO
Total harmonic distortion
MONO
STEREO
S/N
MONO
STEREO
Frequency response
20
Alternate channel selectivity
Capture ratio
Image rejection at 98 MHz
Spurious response rejection at 98 MHz
AM suppression
Stereo separation
1 kHz
10 kHz
Antenna terminal
■ AM TUNER SECTION
Frequency range
Sensitivity
Selectivity
IF rejection at 1000 kHz
87.9-107.9 MHz
11.2dBf (2 pV, IHF’58)
18.3 dBf (4.5 pV, IHF’58)
38.3 dBf (45 pV, IHF’58)
0.2 %
0.3 %
73 dB
67 dB
Hz-15 kHz,+1 dB, -2dB
65 dB
1.5 dB
40 dB
75 dB
50 dB
40 dB
30 dB
75 Cl (unbalanced)
530-1710 kHz
20 pV, 330 pV/m
55 dB
50 dB
■ VIDEO SECTION
Output voltage at 1 V input (unbalanced)
1 ±0.1 Vp-p
Maximum input voltage
1.5 Vp-p
Input/output impedance
75 Cl
S-Video input
TV, DVD/DVD 6CH, VCR1, DVRA/CR 2, VCR 3
S-Video output
VCR1, DVRA/CR 2, TV MONITOR
Component Video input
TV, DVD/DVD 6CH
Component Video output
TV MONITOR
■ GENERAL
Power supply
Power consumption
Dimensions (W x H x D)
AC 120 V, 60 Hz
350 W, 450 VA
430
X
158
X
377 mm
(16-15/16"
X
6-7/32"
X
14-27/32")
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Maintenance
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using chemically treated cloth, read the instructions that
came with the cloth carefully.
RDT6250