Panasonic SA-HE200 EN - Manuel (Page 13)

For your reference
• When playing videotapes (connected to VCR 1)
The picture remains on the screen even if you select TAPE, CD,
CD-R/RW, TUNER or PHONO.
• Once you have set a mode (DSP, AUTO/DIGITAL/ANALOG
input, or 2-channel/6-channel input) for an input source
That mode is engaged whenever you reselect the input source.
• When using a graphic equalizer
Some distortion may occur, depending on the equalizer’s
settings.
• When SPEAKERS B is on
The STEREO DSP SOUND mode is engaged automatically.
• When you finish listening
Be sure to reduce the volume and press [POWER, cVI] to switch
the unit to standby.
• When DTS FIX mode is on
You cannot use ENHANCED SURROUND and DTS-ES signals
will be played through 5.1 channels (i.e., there will be no sound
from the surround back speaker),
• When input is DIGITAL
The tape monitor cannot be used.
o a
B DTS NEOi
INPUT SELECTOR
[INPUT SELECTOR]
For selecting input.
Display («f page 14)
[VCR3]
For a video camera, etc.
[TUNING, V, A]
For tuning the radio and selecting preset stations.
Press and hold until the frequency starts scrolling to
automatic tuning. Tuning stops when a station is found.
[PRESET]
' Press to allow preset station selection with [TUNING, v, A],
^ [MEMORY]'
_ For presetting radio stations.
[FMMODE]
' If reception is poor in FM, press so “MONO” appears to switch to
monaural mode.
^ [BAND]
For switching between FM and AM.
[TAPE MONITOR]
For monitoring sound when recording to a 3 head cassette deck.
Also used when you have connected a graphic equalizer to the
TAPE terminals.
►
A Start play of the
source.
►
c Select the DSP
sound mode.
DSP
SOUND №E
(14 pages 16 and 17)
►
^ Adjust the
volume.
[MULTI DECODER]
Light to indicate the source’s input signal and decoding format ^
used.
• ■
DOLBY DIGITAL EX: Dolby Digital Surround EX sources |
DOLBY DIGITAL: Dolby Digital sources |
DOLBY PRO LOGIC II : Dolby Pro Logic D decoder is being used
DTS-ES: DTS-ES discrete or matrix sources i
DTS: DTS sources
NEO:6: DTS NEO:6 matrix decoder is being used
^ [VOLUME]
Volume control. . ’
CZZ3
RQT6250