Selecting digital output, 1 lpcm96k^48k, 2 dolby digital – Panasonic DVD-K520D Manuel d'utilisation
Page 48: 3 dts
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
(
select
)
Initial settings
Selecting digital output
Select the digital output to be output from the optical digital
audio output connector of the piayer.
1
At the initial settings screen (on page 42)
Press the cursor buttons
( A , T )
to select
“7 Digital Audio Output” and press
SELECT.
____________________
m.<
Digital Audio Output"
i1 LPCMm^48k.. No'
Dolby Digital
dis
Bitstream
Off
0 Exit
2
Press the cursor buttons (A, ▼) to select
the preferred item and press SELECT.
1 LPCM96k^48k:
To select whether digital audio converted to 48 kHz/
16 bit is output from the optical digital audio output con
nector or no digital audio is output during playback of
the DVD recorded in Linear PCM of 96 kHz,
(In case of the DVD recorded in Linear PCM of 48 kHz,
digitai audio converted to 48 kHz/16 bit is output irre
spective of the setting.)
2 Dolby Digital:
To select the signal format (Bitstream or PCM) to be
output from the optical digital audio output connector
during piayback of the DVD recorded in Dolby Digital
(AC-3).
3 dts:
To select whether dts bitstream is output from the opti
cal digital audio output connector or no digital audio is
output during playback of the DVD recorded in dts.
48