Sony MDS-JB930 - Manuel (Page 8)

Setting the Clock
o
(D
3
3
IQ
l/l
Once you set the MD cieck's internal clock, the MD deck
will automatically record the date and time of all
recordings. When playing a track, you can display the
date and time the track was recorded (see page 16).
MENU/NO-
!/►
*/*
ooo o
OOOOCP-
ooooo
OOOOO
OOOOO
ooooo
ooooo
ooooo
ooooo
CEO CDS
o cs
CQ
CD CD
OOO
GD@HS>0
■YES
DATE
PRESENT
While the deck is stopped, press MENU/NO twice.
"Setup Menu" appears in the display.
Turn AMS (or press N◄/►►1 repeatedly) until
"Clock Set ?" appears, then press AMS or YES.
The month indication starts flashing.
vNI------------
- 0 1 n c 0 1 d9 9 y
Turn AMS (or press /►►! repeatedly) to enter
the current month, then press AMS or YES.
The month indication stops flashing, and the day
indication starts flashing.
011
t /y-
-JJ
1 9 9 y
4 Repeat step 3 to enter the day, year, hour, and
minute.
F r i 1 2 : 0 i : i F i f
When you enter the minute, the set date and time
appear again followed by "Complete!!", and the clock
settings are completed.
Changing the clock setting(s)
1 Do steps 1 and 2 above.
2 Press AMS or repeatedly until the setting
you want to change flashes.
3 Turn AMS (or press /►►! repeatedly) to change
the setting, then press AMS or YES.
4 To complete the setting, press AMS or -^/W^
repeatedly until the minute indication flashes, then
press AMS or YES.
Displaying the current date and time U]
You can display the current date and time any time.
Press DATE PRESENT.
Each press of the button changes the display as follows:
|—» Current display —► Date —► Time —|
9 For precise date and time stamping of recordings
Reset the time at least once a week.
Note
If the AC power cord is disconnected for a long time, the
memorized clock settings will disappear and "Initialize" will
flash in the display the next time you plug in and turn on the
deck. If this happens, reset the clock.
8^