Sony MDS-JB930 - Manuel (Page 44)

Changing the Pitch (Pitch Control Function)
Fade In and Fade Out
Finely controlling the pitch (Fine Control
Function)
You can fine control the playback speed in 0.1'’/<i
increments from -98.5‘!o to +12.5”o.
1
While the deck is playing, press PITCH CONTROL
repeatedly until "Pfine" appears in the display.
2
Turn AMS until the desired value appears.
To recall the factory setting
Press CLEAR while setting the value.
9 You can use Setup Menu to change the pitch
During plav, select "Pitch" to set the pitch automatically in steps
or "Pfine" to finely control the pitch.
Notes
• When you change the fine control value, the playback sound
drops out momentarily.
• The fine control value reverts to "O.O'ib" (factory setting) when
you turn off the deck or eject the MD.
• The step and fine control values are linked; changing one value
also changes the other.
You can use Fade-in Play to gradually increase the signal
le\ el to the LINE (ANALOG) OUT jacks and the PHONES
jack at the start of playback. Fade-out Play gradually
decreases the signal level at the end of playback.
Fade-in Recording gradually increases the signal level at
the start of recording. Fade-out Recording gradually
decreases the signal level at the end of recording.
® cooO
ooo
o
ooooo
O O O O O
O O O O O
O O O O O
O O O O O
ooooo
ooooo
0 0 0 0 0
1 o I r « l Q
O
SI (S CD CD
O O O Q
o o < s > y g
FADER
o
r *
3"
Note
The signal level output to the DIGITAL OUT connector does not
change during Fade-in Play nor Fade-out Play.
C
3
r >
r +
o'
3
l / l
Fade-in Play and Fade-in Recording
During play pause (for Fade-in Play) or recording
pause (for Fade-in Recording), press FADER.
flashes in the display and the deck performs Fade-in
Play or Fade-in Recording for five seconds (factory
setting) until the counter reaches "0.0s."
44"