Sony MDS-JB930 - Manuel (Page 5)

Hooking Up the Audio Components
CONTROL All AC power cord
Q
«
S
3
Ifi
VI
r* **
fil
: í
IS a
* Digital equipment with a DIGITAL OUT connector only
**Digital equipment loith both DIGITAL IN and OUT connectors
Required cords
Audio connecting cords (2) (supplied)
When connecting an audio connecting cord, be sure to match the
color-coded pins to the appropriate jacks: white (left) to white
and red (right) to red.
Optical cables (3) (only one supplied)
• When connecting an optical cable, take the caps off the
connectors and insert the cable plugs straight in until they click
into place.
• Do not bend or tie the optical cables.
Coaxial digital connecting cables (2) (not supplied)
=C_3=
Things you should keep in mind while
hooking up the system
• Turn off the power to all components before making
any connections.
• Do not Connect any AC power cord until all the
connections are completed.
• Be sure the connections are firm to prevent hum and
noise.
Jacks (connectors) for connecting audio
components
Connect To the
Amplifiers LINE (AX.AI.OG) IN/OUT jacks
CD players or DBS tuners DIGITAL COAXIAL IN jack or
DIGITAL OPTICAL IN*
connector
Digital amplifiers, DAT decks,
or another MD deck
DIGITAL COAXIAL IN/OUT
jacks or DIC.n'AL OPTICAL IN*/
OUT connectors
=<■ Then’ is no disliiictioii of INI and IN2 conncclors.