Sony MDS-JB920 - Manuel (Page 5)

Hookups
Connecting the deck to an amplifier
Connect the amplifier to the LINE (ANALC>G) IN /
OLT jacks using the audio connecting cords (supplied),
making sure to match the color-coded cords to the
appropriate jacks on the components: red (right) to red
and white (left) to white. Be sure to make connections
firmly to prevent hum and noise.
MD deck Amplifier
Signal flow
Connecting the deck to a digital component such as
a CD player, DAT deck, digital amplifier, or another
MD deck
Connect the component through the DIGITAL
OPTICAL IN/OLTT or DIGITAL COAXIAL IN/OUT
connectors with two (or three) optical cables (only one
supplied) and/or two coaxial digital connecting cables
(rK)t supplied).
When using the optical cables
Take the caps off the connectors and then insert the plugs
parallelly until they click into place.
Be sure not to bend or tie together the optical cables.
MD deck Digital component
COAXIAL Om>L
© ^ ^ ©
You can connect the optical cable
to either OPTICAL IN1 or IN2
Getting Started
When using the coaxial digital connecting cable
MD deck Digital component
DIGITAL _____ ______________^
coaxial optical coaxial optical |
DIGITAL ,J]
COAXIAL
® ^ ^ ® ^ I ®
^ Tin— nil ». ganij
©
Signal flow
If "Din Unlock" and "C71" appear in the display
Make sure the optical cable or the coaxial digital
connecting cable is connected properly.
Q Automatic conversion of digital sampling rates
during recording
A built-in sampling rate converter automatically
converts the sampling frequency of various digital
sources to the 44.1 kHz sampling rate of your MD deck.
This allows you to record sources such as 32- and
48-kHz DAT or satellite broadcasts, as well as compact
discs and other MDs.
Note
If "Din Unlock" alternates with "C71", or "Cannot Copy"
appears in the display, recording through the digital
connector is not possible. In this case, record the program
source through the LINE (ANALOG) IN jacks with the
INPUT switch set at ANALOG.
Connecting the AC power cord
Connect the AC power cord to a wall outlet or to the
outlet of a timer.
>-: Signal flow