Sony MDS-JB920 - Manuel (Page 36)

Controlling a Separately Available Sony CD Changer
When using the coaxial digital connecting cable
MD deck CD changer
Signal flow
Q If "Din Unlock" and "C71" appear in the display
Make sure the optical cable or the coaxial digital
connecting cable is connected properlw
Connecting a control A1 cable to the CD changer
and MD deck
This lets you perform CD synchro-recording and
operate the CD changer using the controls on the MD
deck or the supplied remote (Mega CD Control
Function). Be sure to make connections firmly.
If a component has more than one CONTROL A1 jack,
you can use either one.
MD deck CD changer
s=-
You can connect the cable
to either of the jacks
Signal flow
Notes
• When the deck controls the CD changer with a mode
selector, set the selector to CDl.
• If the plugs are not inserted firmly, "No Connect" appears
in the display and you cannot use the Mega CD Control
Function.
Controlling a CD Changer from
the MD Deck (Mega CD Control
Function)
You can operate a Sonv CD changer connected with a
cwttrol A1 cable using the controls on the MD deck or
the supplied remote.
MEGA CONTROL
indicator
MENU/NO J«AMS>C>11 INPUT
MEGA CONTROL
>25 ■
©
c
5
CD CJ c
©©.©-0.®
@(©@(g)(g)
»■CD CD O CD
Number
buttons
1
2
3
Turn on the amplifier and set the source selector
to CD.
Set INPUT on the deck to the digital input
connector to which the CD changer is connected.
Press MEGA CONTROL.
The MEGA CONTROL indicator lights up and the
deck is set to Mega CD Control mode.
Press MENU/NO.
The current CD disc number starts flashing in the
display.
Turn AMS until the disc number you want
appears, then press AMS (or press the number
buttons and/or >25).
The track number starts flashing.
(Continued)
35"