Sony MDS-JB920 - Manuel (Page 25)

Playing MDs
Locating a Specific Track
You can quickly locate any track while playing a disc
by using the AMS (Automatic Music Sensor) control,
and ►M buttons, number buttons, or M.SCAN
button on the remote.
Number
buttons
M.SCAN
You can extend the playing time during music scan
1 while the deck is stopped, press MENU / NO twice to
display "Setup Menu".
2 Turn AMS to select "Setup 07", then press AMS.
3 Turn AMS to select the playing time within a range ot
6 to 20 seconds (in 1 second steps), then press AMS.
4 Press MENU/NO.
^ To pause playing at the beginning of a track
Turn AMS (or press or ►►!) after pausing
playback.
i*' To go quickly to the beginning of the last track
Turn AMS counterclockwise (or press ) while the
display shows the total track number, total disc playing
time or remaining recordable time of the disc
(recordable disc only), or disc name (see page 23).
To locate Do the following:
The next or succeeding During playback, turn AMS clockwise
tracks (or press repeatedly) until you
find the track.
The current or
preceding tracks During playback, turn AMS
counterclockwise (or press
repeatedly) until you find the track.
A specific track
directly iXl Press number buttons to enter the
track number.
A specific track by
using AMS 1 Turn AMS until the track number
you want to locate appears while
the deck is stopped. (The track
number is flashing.)
2 Press AMS or O.
By scanning each track
for 6 seconds (music
scan)d 1 Press M.SCAN before you start
playing.
2 When you find the track you want,
press O to start playing.
*0* When you directly locate a track with a number over
25 CC
You must press >25 first, before entering the
corresponding digits.
Press >25 once if it is a 2-digit track number, and twice
if it is a 3-digit track number.
To enter "0", press button 10.
Examples; • To play track number 30
Press >25 once, then 3 and 10.
• To play track number 100
Press >25 twice, then 1, 10 and 10.
2 5
^