Erasing a part of a track (a-b erase function), Example: erasing a part of track a, Kwamsl>oi – Sony MDS-JB920 Manuel d'utilisation
Page 42: To cancel the a-b erase function, Note, Editing recorded mds
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Editing Recorded MDs
Erasing a Part of a Track (A-B
Erase Function)
You can specify a portion within a track and erase the
f>ortion with ease. It is convenient when erasing
unnecessary sections after recording satellite broadcast
or FM broadcast.
Example: Erasing a part of track A
KWAMSl>Oi!
1
While the deck is stopped, playing, or pausing,
press MENU/NO to display '"Edit Menu'
2
Turn AMS until A- B Erase appears u> ihe
display.
3
Press AMS or YES.
4
Turn AMS to select the numb.. : of the track, then
press AMS or YES.
“-Rehearsal-" and “Point A ok?" alternates in the
display while the deck plays back the selected
track from the beginning.
5
while monitoring the sound, turn AMS to find the
starting point of the portion to be erased (point
A).
You can select the unit by which the starting point
is shifted. Press the or ►► button to select
frame*, second, or minute.
For frame, the number of frames appears when
^ you turn the AMS control; for second and minute,
“s" or “m" flashes in the display.
• 1 frame is about 12 ms.
6
If the point A IS still incorrect, repeat Step 5 until
it is correi t.
7' Pres.^ AMS or YES it the position is correct.
“Point B set" appears in the display and playback
for setting the end point of the portion to be erased
(point B) starts.
8
Continue playback (or press or until the
deck reaches point B, then press AMS or YES.
“A-B Ers" and “Point B ok?" alternates in the
display while the deck repeats a portion of a few
seconds before point A and after point B
successnely.
9
Repeat Step 5 if point B is not correct.
10
Press AMS or YES when the position is correct.
“Complete!!“ appears for a few seconds and the
portion between point A and B is erased.
To cancel the A-B Erase Function
Press MENU/NO or«.
Note
If “Impossible" appears in the display, this means;
- You specified point B comes before point A.
Point B should be specified after point A.
. - The specified portion cannot be erased.
This sometimes happens when you’ve edited the same
track many times, and is due to a technical limitation of the
MD system, not a mechanical error.
AV