Additional information 14, Reverse display style, Child lock – Pioneer NS-DV1000 Manuel d'utilisation
Page 78: Recording dvd-audio using the rec mode, Resetting the unit
Additional information
14
78
En
Reverse display style
• Default setting:
On
When this feature is set to
On, the system will
periodically inverse the colors in the graphic
display. To switch this feature off, set to
Off.
1
Switch the system into standby.
2
Press SYS MENU.
3
Use the / (cursor left/right) buttons
to select ‘Reverse Display’.
4
Use the / (cursor up/down) buttons
to select ‘On’ or ‘Off’.
5
Press ENTER to exit.
Child Lock
• Default setting:
Off
This system has a child lock feature that makes
the front panel buttons inoperative. This is
useful when you’ve set the wake-up timer and
don’t want the unit switched on before it
activates.
1
Switch the system into standby.
2
Press SYS MENU.
3
Use the / (cursor left/right) buttons
to select ‘Child Lock’.
The current setting is shown in the display.
4
Use the / (cursor up/down) buttons
to select ‘On’ or ‘Off’.
5
Press ENTER to exit.
Recording DVD-Audio using
the REC Mode
• Default setting:
Off
When Rec Mode is
On, a stereo downmix of
multi-channel DVD-A discs is output from the
speakers and from the analog audio jacks.
When set to
Off, multi-channel DVD-A discs
are played through all the speakers, but nothing
is output from the analog audio jack.
Note that with some discs, only the front left/
right channels are output. Also, whether
On or
Off, DVD-A audio is not output from the digital
audio jack.
1
Press ‘CD DVD’ to switch the system to
the CD/DVD function.
2
Press SYS MENU.
3
Use the / (cursor left/right) buttons
to select ‘REC Mode’.
4
Use the / (cursor up/down) buttons
to select ‘On’ or ‘Off’.
5
Press ENTER.
Resetting the unit
Use this procedure to reset all the player’s
settings to the factory default.
1
Press TUNER.
2
Press and hold down the
7 (stop)
button on the front panel until you see the
message ‘Memory Clear?’ (about 8 seconds)
then release.
3
Within 3 seconds, press and hold down
the
7 (stop) button again for 3 seconds to
reset the system.
All the player’s settings are now reset, and you
should see the ‘Let’s Get Started’ screen.