Pioneer NS-DV1000 - Manuel (Page 54)

Using the timer 10
54
En
Setting the wake-up timer
Use the wake-up timer to set the system to
switch on at any time and start playing
whatever source you want.
• The clock must be set to the correct
time for the wake-up timer to work
properly (see
page 23).
ENTER
MASTER
VOLUME
STANDBY/ON
CD FM/AM
DVD TUNER TV VIDEO
V1/V2/V3
TIMER
1 Select the source you want played.
For example, press TUNER to select the radio
as your source.
2 Prepare the source.
For example, tune in the radio station you
want to wake up to.
If you’ve selected a CD, make sure that it’s
stopped.
3 Set the volume.
4 Press TIMER.
5 Use the / (cursor left/right)
buttons to select ‘Wake-Up’ then press
ENTER.
6 Use the / (cursor up/down)
buttons to select ‘Timer Edit’ then press
ENTER.
7 Set the switch-on time.
Use the / buttons to set the hour, then
press ENTER. Set the minute in the same
way, pressing ENTER when you’re done.
8 Set the switch-off time.
Use the / buttons to set the hour, then
press ENTER. Set the minute in the same
way, pressing ENTER when you’re done.
After pressing ENTER this last time, the
wake-up timer settings are shown in the
display.
9 Switch the system into standby mode.
The wake-up timer will not work if the system
is left on!
• You can check the timer settings in
standby by pressing TIMER.