Pioneer VSX-C501-S - Manuel (Page 22)

Controls and displays 04
22
En
Display
1 DIG (digital) / ANA (analog) (page 35)
Indicates whether the current input source is analog or
digital.
2 MULTI indicator (page 35)
Lights when the multichannel analog inputs are selected
as the input signal type for the
DVD input.
3 Hi-FS indicator
Lights when the current input signal is 88.2/96 kHz
digital.
4 Sleep timer indicator (page 35)
Lights when the sleep timer has been set.
5 DIALOG indicator (page 29)
Lights when Dialog Enhancement is on.
6 Input/output channel indicators
The combined input/output indicators show at a glance
which channels are present in a source and the speakers
that are being used for the output.
The letters L , C , R , LFE , Ls and Rs indicate the input
channels coming into the receiver (left, center, right, low
frequency effect, left-surround and right-surround
respectively).
S lights in Dolby Surround or Surround
Monoaural and when playing Dolby EX or DTS-ES
soundtracks.
The triangular segments and SW (subwoofer) indicate
the active speaker output channels.
7 VIR.SB indicator (page 30)
Lights when the Virtual Surround Back effect is on.
8 OVER indicator (page 40)
Lights when the input signal is too high, risking
distortion. Use the input attenuator to reduce the level.
9 Tuner indicators
STEREO (page 31)
Lights when listening to a stereo FM broadcast in
auto/stereo mode.
TUNED
Lights when tuned to a broadcast.
MONO (page 31)
Lights when the tuner MPX mode is set to mono.
RDS (page 32)
Lights when listening to a station that is
broadcasting RDS information.
RF ATT (page 31)
Lights when the RF attenuator is switched on.
10 Character display
11 EON indicators (page 34)
EON lights when EON is set. The dot indicator to the left
lights when the current broadcast carries the EON data
service.
12 Volume level indicator
Indicates the volume level in dB.
1 3 2 5 4 6 8 7
9
10 12 11
MULTI DIALOG
Input indicators Output indicators
vsx-c501(WY).book 22 ページ ２００３年５月２２日 木曜日 午前１０時２９分