Pioneer VSX-C501-S - Manuel (Page 14)

Connecting your equipment 03
14
En
Connecting a VCR or DVD recorder
For video recording, connect a VCR or DVD recorder to
the
DVR/TV IN/OUT AV connector. The DVR/TV OPT2
jack for optical digital input means that you can play
digital sound tracks from a DVD (or other digital)
recorder.
1 Use SCART cable to connect the DVR/TV IN/OUT
AV connector to an AV connector on your VCR, DVD
recorder (or other video component).
This allows playback from and recording to the VCR/DVR
(or other component).
2 Use an optical digital audio cable to connect the
DVR/TV OPT2 jack to an optical digital audio output
on your DVD recorder (or other video component).
This connection carries stereo and multichannel digital
audio.
Note
• If your video component doesn’t have a digital audio
output, omit step 2 above.
• In order to record, you must connect the SCART
cable (the digital connection is for playback only).
Note
• Some TVs have both RGB and i/o-Link.A compatible
AV connectors, or a single AV connector is
switchable. See the instructions that came with your
TV for more details. This receiver is compatible with
both formats without the need to switch.
• When the DVR is switched on, make sure that it is set
to the correct input so that audio/video from the
receiver gets passed through to the TV.
• When the receiver is unplugged or in standby (with
AV Direct off), you may be able to hear distorted
sound from the
VIDEO IN/OUT AV connector and
the DVR/TV IN/OUT AV connector if a connected
component is playing.
COAX
SUB WOOFER
L
R
CENTER SURROUND
CONTROL
AV CONNECTOR
AC IN
AUDIO IN (5.1CH) STB IN DVD IN
VIDEO IN/OUT DVR/TV IN/OUT
FM UNBAL 75 Ω
AM LOOP
ANTENNA
IN
OUT
SUB
WOOFER
OUT
STB (DVD)
OPT1 DVR/TV
OPT2
DVD (STB)
DIGITAL IN
SPEAKERS FRONT SURROUND R CENTER SURROUND BACK L R L
+
–
VSX-C501
AV CONNECTOR
OPTICAL COAXIAL
DIGITAL OUT
VIDEO IN/OUT VIDEO IN/OUT
TV
AV CONNECTOR IN
DVR, etc.
vsx-c501(WY).book 14 ページ ２００３年５月２２日 木曜日 午前１０時２９分