Pioneer VSX-C501-S - Manuel (Page 21)

Controls and displays
21
En
English
04
Chapter 4
Controls and displays
Front panel
1 Front panel connections cover
Pull where indicated to access the front panel
connections (
SETUP MIC/PHONES jack, FRONT INPUT
jacks).
2 STANDBY/ON button
Press to switch the receiver on or into standby.
3 AV DIRECT indicator
Lights in standby when the receiver is passing an audio/
video signal from one SCART AV connector to another.
4 Digital surround format indicators
2 DIGITAL indicator
Lights when the current source is Dolby Digital.
DTS indicator
Lights when the current source is DTS.
5 Listening mode indicators
2 PRO LOGIC II indicator (page 28)
Lights when one of the Dolby Pro Logic II surround
modes is active with a 2 channel (stereo) source.
NEO:6 indicator (page 28)
Lights when the Neo:6 listening mode is active with a
2 channel (stereo) source.
ADVANCED indicator (page 29)
Lights when one of the Advanced Surround modes is
active.
PHONES indicator (page 29)
Lights when phones surround mode is active.
SOUND MODE indicator (page 29)
Lights when one of the Sound Modes is active.
6 Remote control sensor
7 INPUT SELECTOR knob (page 27)
Turn to cycle through the various inputs. The current
input is shown in the front panel display.
8 MASTER VOLUME knob
Use to adjust the volume.
VSX-C501
SOUND MODE INPUT SELECTOR MASTER
VOLUME PHONES ADVANCED NEO:6 STANDBY/ON DTS 2 PRO LOGICII AV DIRECT 2 DIGITAL
DOWN UP
PULL-
OPEN
1 2 4 5 3 7 8 6
vsx-c501(WY).book 21 ページ ２００３年５月２２日 木曜日 午前１０時２９分