Before a self-cleaning cycle, How to run a self-cleaning cycle – Samsung NE58H9970WS-AA Manuel d'utilisation

Page 71

Advertising
background image

Before a self-cleaning cycle

Fig. 1

• We recommend venting your kitchen by

opening a window or using a ventilation fan or

hood during the self-cleaning cycle.

• Remove the wire rack, broil pan, broil pan

insert, all cookware, and any aluminum foil

from the oven.

• Wipe up debris from the oven bottom. (Fig. 1)

• The silver-colored oven racks can be self-

cleaned, but they will darken, lose their luster,

and become hard to slide.

• Residue on the front frame of the range and

outside the gasket on the door will need to

be cleaned by hand. Clean these areas with

hot water, soap-filled steel-wool pads, or

cleansers such as Soft Scrub. Rinse well with

clean water and dry.

• Do not clean the gasket. The fiberglass

material of the oven door gasket cannot

withstand abrasion. It is essential for the

gasket to remain intact. If you notice it

becoming worn or frayed, replace it. (Fig. 2)

• Make sure the oven light bulb cover is in

place and the oven light is off.

Don’t hand

clean the

oven door

gasket.

Fig. 2

You may

hand clean

the door.

Remove oven racks and accessories before starting the self-clean mode.

How to run a self-cleaning cycle

1. Select the length of time for the self-cleaning operation, eg. 3 hours.

Press SELF CLEAN once for a 3 hour clean time, twice for a 4 hour clean time,

or 3 times for a 5 hour clean time.

The default setting is 3 hours.

2. Start the self-cleaning cycle.

Press START SET. The motor-driven door lock will engage automatically.

3. When the self-cleaning cycle is done, End will show in the display and a beep will

sound 6 times.

English - 71

07

MAINT

AINING Y

OUR APPLIANCE

Manual Users_NE58H9970WS_AA_AC_DG68-00550A-00_EN.indd 71

19/05/2014 18:21:36

Advertising