16 - solving operational problems – Fulgor Milano 700 Series 24 Inch Single Combi-Speed Electric Wall Oven Installation & Use Manual Manuel d'utilisation

Page 34

Advertising
background image

EN

32

16 - Solving Operational Problems

Before contacting service, check the following to avoid unnecessary service charges.

Oven Problem

Problem Solving Steps

Other F__ Error appears in the display window.

Remove power and turn it back on again after a few seconds.

If condition persists, note the code number (in the EVENT LOG

list) and contact service.

The oven display stays OFF

Turn off power at the main power supply (fuse or breaker box).

Turn breaker back on.

If condition persists, call an authorized service.

Cooling fan continues to run after oven is turned off

The fan turns off automatically when the electronic components

have cooled sufficiently.

Oven is not heating

Check the circuit breaker or fuse box to your house. Make sure

there is proper electrical power to the oven. Make sure the

oven temperature has been selected.

Oven is not cooking evenly

Refer to cooking charts for recommended rack position. Always

reduce recipe temperature by 25°F (15°C) when baking with

Convection Bake mode.

Clock and timer are not working properly

Make sure there is proper electrical power to the oven. See the

Clock sections on pages 11 and 14.

Excessive moisture

Convection modes will eliminate any moisture in oven (this is

one of the advantages of convection).

Advertising