Epson 3000 - Manuel (Page 145)

Labels
When printing on labels, please note the following:
❑ Do not use labels that are curled or folded. Also avoid
using labels that are peeling off the backing.
❑ Return unused labels to their original packages.
Unfavorable storage conditions such as high temperature,
humidity, or direct sunlight can damage them.
❑ If your labels jam or don’t feed properly, see Chapter 8,
“Troubleshooting.”
For single-sheet labels:
❑ Load sheets of labels into the manual feed slot one sheet
at a time. Otherwise, they may not feed properly. See
“Loading paper manually” on page 5-6. Also, see
Appendix D for specifications.
❑ Only use labels that completely cover the backing sheet;
otherwise, they may peel off and jam the printer.
❑ Make sure that the printable surface of the labels is face up.
For continuous labels:
❑ Choose labels mounted on a continuous backing sheet with
sprocket holes for use with the tractor feeder.
❑ Make sure the printing stays entirely within the printable
area. See Appendix D for specifications.
❑ Make sure you load labels with the printable surface face up.
❑ Make sure the auto tear-off feature is set to off in the
default-setting mode when using continuous labels.
5
R
Loire-p Ref. Guide
Rev.c
A5 size Chapter 5
02-24-97 DR, pass 0
Paper Handling 5-29