Labconco WaterPr RO Systems 90750 Series - Manuel (Page 14)

Chapter 3: Getting Started
10
Original Instructions
Unpacking Your WaterPro RO System
Carefully unpack your WaterPro RO System and inspect it for damage that may have occurred in
transit. If your WaterPro RO System is damaged, notify the delivery carrier immediately and retain
the entire shipment intact for inspection by the carrier.
The United States Interstate Commerce Commission rules require that claims be filed with the
delivery carrier within fifteen (15) days of delivery.
NOTE: Do not return goods without the prior authorization of Labconco. Unauthorized
returns will not be accepted. If your WaterPro RO System was damaged in transit, you must
file a claim directly with the freight carrier. Labconco Corporation and its dealers are not
responsible for shipping damage.
Do not discard the carton or packing material for your WaterPro RO System until you have
checked all of the components and installed and tested the WaterPro RO System.
WaterPro RO System Components
The WaterPro RO System available in 115V or 230V. Locate the model of WaterPro RO System
you received in the following table. Verify that the components listed are present and undamaged.
As shipped, the carton should contain the following:
Part Number Description
90750-20
115V WaterPro RO System – wall mounted
or
90750-30,-40,
-60,-70 or -80
230V WaterPro RO System – wall mounted
9087300 Manual, RO
9044700 Spanner wrench
9108200 Template
1334500 or
115V Power Cord
1336100 or 230v EU Power Cord
1338000 or 230v US Power Cord
1332600 or 230v UK Power Cord
1332700 or 230v China/AUS Power Cord
1345700 230v India Power Cord
9081500 Water Profile Test Kit Request Card
9013415 Tube, Thermoplastic 3/8" O.D. x 1/4" I.D. x 60"
1897432 Tapping Screw, Wall Mount ¼-14 x 2" Lg