Labconco WaterPr PS Systems 90007 Series - Manuel (Page 14)

Chapter 3: Getting Started
10
Original Instructions
Unpacking Your WaterPro PS System
Carefully unpack your WaterPro PS System and inspect it for damage that may have occurred in
transit. If your WaterPro PS System is damaged, notify the delivery carrier immediately and retain
the entire shipment intact for inspection by the carrier.
The United States Interstate Commerce Commission rules require that claims be filed with the
delivery carrier within fifteen (15) days of delivery.
NOTE: Do not return goods without the prior authorization of Labconco. Unauthorized
returns will not be accepted. If the WaterPro PS System was damaged in transit, you must
file a claim directly with the freight carrier. Labconco Corporation and its dealers are not
responsible for shipping damage.
Do not discard the carton or packing material for your WaterPro PS System until you have
checked all of the components and installed and tested the WaterPro PS System.
WaterPro PS System Components
The WaterPro PS System is available to operate at 115V or 230V. Locate the model of WaterPro
PS System you received in the following table. Verify that the components listed are present and
undamaged.
As shipped, the carton should contain the following:
Part Number Description
9000520 General Chemistry Model, 115V, 60 Hz
9000521 General Chemistry Pistol Model, 115V, 60 Hz
9000530, 40, 60, 70, 80 General Chemistry Model, 230V, 50 Hz
9000531, 41, 61, 71, 81 General Chemistry Pistol Model, 230V, 50 Hz
or
9000620 HPLC Model, 115V, 60 Hz
9000621 HPLC Pistol Model, 115V, 60 Hz
9000630, 40, 60, 70, 80 HPLC Model, 230V, 50 Hz
9000631, 41, 61, 71, 81 HPLC Pistol Model, 230V, 50 Hz
or
9000720 UF Model, 115V, 60 Hz
9000721 UF Pistol Model, 115V, 60 Hz
9000730, 40, 60, 70, 80 UF Model, 230V, 50 Hz
9000731, 41, 61, 71, 81 UF Pistol Model, 230V, 50 Hz
or
9000722 HPLC/UF Hybrid, 115V, 60 Hz
9000732, 42, 62, 72, 82 HPLC/UF Hybrid, 230V, 50 Hz