RCA VR270 - Manuel (Page 37)

Optional A ccessories
Several accessories are available that will enable you to
expand your home video system. You may also find
some of these items helpful when installing your VCR. A
few accessories are pictured here to briefly familiarize
you with the different types that are available. Although
RCA Part Numbers are listed for your convenience,
other accessory brands are also compatible with your
RCA video system. Accessories are available through
most electronic supply stores and RCA video dealers.
AH030
-------- Adapters------------------------------------
Scrcw-on to push*on adapter, attaches to
end of coaxial cable with standard “F’
connector so you can simply push the
connector onto your TV or VCR antenna
connector. Useful if you change connections
frequently.
Connectors -
AH044
AH023
Used to interconnect two audio cables
equipped with phono-type male plugs.
“Splicer" lets you connect one coaxial cable
to another. Used for extending an antenna
lead-in or for operating your VCR at a
greater distance from the TV,
Cleaner/Polisher
Anti-static cieaner/polisher that can be used on
any hard, shiny, non-absorbent surface such as
plastics, glass, mirrors, and chromed parts.
Cleans and polishes TV screens and plastic cabi­
nets. Returns brilliance, repels dust, and resists
fingerprints.
AH035
AH028
'Switches -
AH041
This is an economy two-position 7S-ohm coax­
ial switch which performs the same functions
outlined for the AHCMl switch, shown below
This is a --position 75-ohm coaxial switch
(sometimes referred to as an A-B switch) used
for switching a single signal source to two
separate output devices, such as a cab!e-TV
input to a TV set or VCR.
Band Separators
AHOI 5
Used to connect a single 75-ohm inpul
antenna line to separate 75-ohm VHP,
300-ohm UHF and/or 300-ohm FM receiver
inputs.
Used to connect a single 300-ohm input
antenna line to separate 7S-ohm VHP,
300-ohm UHF and/or 300-ohm FM receiver
inputs.
Used to connect a single 75-ohm antenna
input line to separate 300-ohm inputs of TV.
-Transformers ■
AHoie
Used to match a 75-ohm signal source to a
300-ohm device, or a 300-ohm signal source
to a 75-ohm device. (Such as antenna lead-
ins to TV receivers),
This transformer is specifica)iy designed to
match a 300-ohm line to a 75-ohm "F”-type
input. It provides quick push-on connection
to an "F'-iype input jack.
e « If
AH048
«
AHOI 4
■ Splitters/Combiners----------------------
Used as a splitter to divide a signal from a
single 75-ohm source so that ii may be fed to
two separate devices. For example, a single
75-ohm antenna lead-m signal spbt to feed
two TV receivers When used as a combiner,
signals from two sources are fed tkuough two
inputs to a single output
The same as AH047 above except AH04S
provides four outputs from a single input.
As a combiner, four signal inputs feed to a
single output.
4-set coupler lets you operate up to four
TV’s and VCR's from one lead-in. (Use
AH025 terminators on unused outlets.) In
fringe areas use the
AH046 distribution
amplifier.
- Terminator ■
AH025
AH025 terminator should be at'ached to
unused terminals of signal spliuers to
prevent smearing the picture,
RCA non-abrasive wet system VHS VCR
head cleaner. Be sure to follow directions
carefully.
AV009W
35