RCA VR270 - Manuel (Page 34)

A Iternate Remote Control Units
Selected models of RCA color TV' receivers and
monitor/receivers feature remote controls that will also
control your VCR. Only the buttons that are used for
controlling your VCR are described here. These buttons
have generally the same functions as the ones with the
same names on the front panel of the VCR, but there are
some differences.
Any VCR tuner channel may be selected by pressing
two of the Digit buttons on the hand unit. Press 0 first
to select tuner channels 1 through 9.
Separate buttons turn the VCR on and off.
Simply press the RECORD button to record. It is not
necessary to press the PLA Y button at the same lime.
Press to Play.
Used for setting the clock and
programming the timer.
Press to rewind when VCR is
stopped or reverse scan when
VCR is in Play mode.
Press agatn (or press PLA Y) to
return to normal playback.
Press lor last forward when VCR
is stopped or forward scan when
VCR is in Play mode.
Press agarn (or press PLAY) to
return to normal playback.
Used when programming the
timer. Also resets tape counter
when tape counter is displayed.
PreM this button to turn on VCR
and put remote In “VCR Mode".
Other button« on remote wifi no!
control the VCR until this button
Is pressed.
Turns the Tape Counter
and Memory Stop features on and off
Press to record.
Stops the normal VCR functions
of Play, Record, Rewind, and
Fast Forward.
Two buttons select any channel.
Press during Playback to display
Stop Action. Press PAUSE again
to resume normal playback. Can
also be used to temporarily
interrupt a recording.
Select next higher or lower
channel in VCR's scan list.
Press to switch antenna between
TV and VCR (Same as TV/VCR
button on VCR's remote.)
Turns power off.
I Press once to display VCR status.
Press twice to display tape counter.
Press three times to remove all displays.
Press this button to turn on VCR
and put remote In "VCR Mode".
Other buttons on remote will not
control the VCR until this button
Is pressed.
Two buttons select any channel.
Press during Playback to display
Stop Action. Press PAUSE again
to resume normal Playback. Can
also be used to temporarily
interrupt a recording.
Press to record.
Used for programming the timer.
Also resets the tape counter to
0000 (when tape counter is
displayed).
Press to rewind when VCR is
stopped. Press to reverse search
if VCR is playing. Press again
(or press PLAY) to return
to normal playback.
PROGRAM: Used tor setting the
clock and programming the
timer.
Turns off power.
Stops the normal VCR functions
of Play, Record, Rewind and Fast
Forward.
Select next higher or lower
channel in VCR's scan list.
Press to play.
Press for fast forward when VCR
is stopped. Press lor forward
search when VCR is playing.
Press again (or press PLAY)
to return to normal playback.
Press once to display VCR status.
Press twice to display tape counter.
Press three times to remove all displays.
Press to switch antenna between
TV and VCR. (Same as TV VCR
button on VCR's remote.)
32