Power supply, Installation options – GE ZGU385NSMSS Manuel d'utilisation
Page 13
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Installation Options
COOKTOP INSTALLATION OVER A
MONOGRAM WARMING DRAWER,
MODEL ZTD910 OR ZKD910
These cooktops may be installed over a 30" or
21" Warming Drawer. Both the cooktop and the
warming drawer must be installed according to
each specific installation instruction.
Install 2x4 or 2x2 anti-tip block against rear
cabinet wall 9" from cutout floor
to bottom of block
Cooktop 33-7/8"
POWER SUPPLY:
If local codes permit, the cooktop and warming
drawer may operate from the same 120V duplex
outlet. Refer to installation instructions for details.
1-1/2" cabinet top
36"
countertop
height
Dim. A
ZTD910
28-1/2"
ZKD910
25-1/2"
NOTE: When installing a Monogram Warming Drawer
below a cooktop, a solid barrier must be installed at
least 1" from the lowest point of the bottom of cooktop
burner box to the top of cutout. See Warming Drawer
Installation Instructions for details.
Use a 36" or wider base cabinet.
• Plan gas supply location carefully to avoid
interference with the warming drawer.
13