Notes, Synchronization setting (sync), Line-lock sync mode (ll) – Panasonic WV-CS554 Manuel d'utilisation
Page 39: T___________________________________________ i
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

When OFF is selected for SUPER-D2 on the ALC CONT menu
— 0FF*-X2 AUTO-- X4 AUTO** X6 AUTO— X10 AUTO —j
I—X16 AUTO—X32 AUTO—OFF — X2 FIX— X4 FIX------- ^
Ì-X6 FIX—X10FIX—X16FIX—X32FIX-—^
When ON is selected for SUPER-D2 on the ALC CONT menu
OFF—X2 AUTO— X4 AUTO— X6 AUTO— X10 AUTO — X16 AUTO — X32 AUTO
t___________________________________________ i
Notes:
• When ON is selected for SUPER-D2 in the ALC CONT menu, FIX
is not available for this item.
• When you select AUTO for SENS UP and ON for SUPER-D2, the
SENS UP function has priority so that the SUPER-D2 function is
not activated automatically.
• While the SENS UP function is selected, noise or spots may
appear in the picture when the sensitivity of the camera is
increased. This is a normal phenomenon.
7. Synchronization Setting (SYNC)
1. Display SET UP on the monitor screen.
If necessary, refer to Setup Menu Display on page 16 for details
on displaying the SET UP menu on the monitor screen.
2. Move the cursor to SYNC and select line-lock (LL) or internal (INT)
by using the joystick. The menu screen follo\ws the example for
WV-CS854A.
Important Notices:
1. The priority of SYNC modes is as follows:
1. Multiplexed vertical drive (VD2) (highest priority)
2. Line-lock (LL)
3. Internal sync (INT) (lowest priority)
2. To use internal sync, select INT.
3. Whenever the vertical drive pulse (VD2) is supplied to the cam
era, the camera sync mode is automatically switched to the multi
plexed vertical drive (VD2) regardless which sync mode is select
ed.
Camera setting menu
** SET UP *•
CAMERA ID
OFF
ALC/HAMUAL
ALC
SHUTTER
OFF
AGC
OH{MID}
SENS UP
X3 AUTO
SYtlC
IHT.
WHITE BAD
ATW
HOTION DET
OFF
AT
MODE
HAHUAL И
RET SPECIAL! ‘t
Line-lock Sync Mode (LL)
1. Display SET UP on the monitor screen.
(Refer to Setup Menu Display on page 16 for details on displaying
the SET UP menu on the monitor screen.)
2. Move the cursor to SYNC and select LL by using the joystick. LL
sync mode is not available when the multiplexed vertical drive
(VD2) pulse is supplied.
Camera setting menu
SET OP *•
CAMERA ID
OFF "1
ALC/HJUH7AL
AIiC Ч
SHUTTER
OFF
AOC
OH(MID)
SEH3 UP
X! AOTO
SYNC
[bL il
WHITE SAL
ATW 't
HOTION DET
OFF
AF MODE
MAHDAL И
RET SPECIAL! '«
39