Proportional pan/tilt (propo. p/t), Area title (area title) <sse – Panasonic WV-CS554 Manuel d'utilisation
Page 27
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

3-6
To complete new settings and repeat another setting, move the cursor to SET and press the CAM
(SET) key. The ZONE NUMBER Selection menu returns.
To cancel new settings and return to SPECIAL 1 MENU, move the cursor to DEL and press the
CAM (SET) key. New settings are not registered.
To complete new settings and return to SPECIAL 1 MENU, move the cursor to RET and press the
CAM (SET) key.
Proportional Pan/Tilt (PROPO. P/T)
* Move the cursor to PROPO, P/T and select either ON or OFF by
moving the joystick to the right or left.
Default: ON
ON: Pan/tilt speed is in inverse proportion to the zoom ratio as fol
lows;
Zoom ratio
x1
x2
x4
x8
x15 or more
Speed level
8 (the fastest)
5
3
1
0 (the slowest)
* The speed level values are approximate,
OFF: The speed is constant at the fastest level on the communi
cation command regardless of the zoom ratio.
Special 1 menu
** SPECIAL
* m
PRIVACY ZONE
OFF(EHB)-»
PROPO.P/T
OUi
AREA TITLE
ON (USER)"*
PATROL
STOP
AUUtM IH/OUT
**»
PASSWORD LOCK
OFF"*
CLEAHIMO
OFF
EL-ZOOM
ON
PRESET AliH
OFF
IMAGE HOLD
RET
OFF
Special 1 menu
• Area Title (AREA TITLE) <SSE>
up to 8 area titles can be added in specific positions.
1. Select ON (NESW), ON (USER) or OFF by moving the joystick to
the right or left.
ON (NESW): An area title is displayed indicating the camera
direction: North (N), North-East (NE), East (E), South-East
(SE), South (S), South-West (SW), West (W) and North-West
(NW).
ON (USER); A user customized area title is displayed with a maxi
mum of 16 characters.
OFF: Area tittle is not displayed.
Default: ON (USER)
2. Press the CAM (SET) key. A submenu appears except when OFF
is selected.
Settings for ON (NESW)
1. Move the cursor to PUSH SET on the PAN^ILT line, then press
the CAM (SET) key. РАЫЯ1ЕТ is highlighted and “U TILT D/L PAN
R" appears.
2. Move the joystick to turn the camera north, then press the CAM
(SET) key. The origin of the direction (North) is set.
*• SPECIAL 1 **
PRIVACY ZONE
OFF(ENB)'*
PROPO.P/T
ON
AREA TITLE
ON (NESW)"*
PATROL
STOP
ALARM IN/ODT
PASSWORD LOCK
OFF^
CLEANING
OFF
EL-ZOOM
ON
PRESET ALM
OFF
IMAGE HOLD
RET
OFF
AREA TITLE (NESW) setting menu
** DIRECTION(NESW)
**
PAN/TILT
-PUSH
SET
ZOOM/FOCUS
POSI "*
-"PUSH SET
+•
N
RET
PAN^ILT setting menu
** DIRECTION(NESW) ••
1
pan
/
tilt
]
-PUSH SET
ZOOM/FOCUS
-PUSH SET
POSI %
[и TILT р'/L PAN_H]]
+
N
RET
27