Auto mode selection – Panasonic WV-CS554 Manuel d'utilisation
Page 23
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

■ Auto Mode Selection
The menu screens follow the example for WV-CS854A.
1. To set auto mode
Move the cursor to AUTO MODE and select a mode by moving
the joystick to the right or left. Modes change as follows:
p OFF** SEQ^ SORT^AUTO PAN ^PATROL*-|
Setup menu
OFF-*SEQ**SORT—AUTO PAN
2. When AUTO PAN is selected, set details as follows:
Move the cursor to AUTO PAN ■» and press the CAM (SET) key to
display the AUTO PAN setting menu.
3. To set a panning start position and panning end position
Follow the steps below.
(1) Move the cursor to POSITION SET and press the CAM (SET)
key.
The cursor moves to START.
(2) Move the joystick to the right or left to select a panning start
position and press the CAM (SET) key.
This determines the start position and the cursor moves to
END,
(3) Move the joystick to the right or left to select a panning end
position and press the CAM (SET) key.
This determines the end position and the cursor moves to
POSITION SET.
4. To set a panning speed
Move the cursor to SPEED, and move the joystick to the right or
left to set a panning speed.
The panning speed increases when the joystick is moved to the
right, and decreases when it is moved to the left.
Caution: If the panning range is changed after the camera has
not panned for a long time or has been panning in the same
panning range, the picture may not be clear or noise may
appear. In this case, pan the camera fully several times. If this
does not eliminate the problem, refer servicing to qualified
service personnel.
5. To set pan limit ON/OFF
Move the cursor to PAN LIMIT and select ON or OFF by moving
the joystick to the right or left.
ON: Manual pan is limited from the start point to the end point
specified by POSITION SET. Set endless turn to OFF before
pan limit is set to ON.
OFF: Manual pan is not limited.
Note: When ON is set, manual pan moves the camera away from
the other side of the start-end range.
** SET UP МЕШ *•
PRESET 1 "1
HRP
HOME POSITION
OFP
SELF RETURN
OFF
AUTO MODE
AUTO^PAH "»
AUTO PAN KEY
AUTO PAH
DIGITAL PLIP
OH
LOCAL/REMOTE
SPECIAL! "1
CAMERA '«
RS485 SET UP '1
LOCAL
AUTO PAN setting menu
** AUTO PAH *•
POSITION SET]
START
EHD
SPEED
L
H
PAH LIMIT
OFF
EHDLE5S
OFF
DWELL TIME
IS
RET
** AUTO PAN **
POSITIOM SET
START,
END
SPEED
L К
PAH LIMIT
OFF
ENDLESS
OFF
DWELL TIME
13
RET
•* AUTO
PAH ••
POSITION SET
START
end
"
SPEED
• • • • I *
L
H
PAH LIMIT
OFF
ENDLESS
OFF
DWELL TIME
IS
RET
** AUTO PAN **
POSITION SET
START
EHD
SPEED
. . . ] . .
L
H
PAH LIMIT
OFF
ENDLESS
OFF
DWELL TIME
IS
RET
23