Installing the software (continued), Installing the software – Sony DVBK-1000 Manuel d'utilisation
Page 16
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Installing the software
(continued)
• When your PC uses shadow memory
Disable any memory address allocated to shadow
memory for your PC not to conflict with the
memory space allocated to the capture board.
The setting procedure depends on your PC. For
details, refer to the instruction manual for your PC.
Affer sefup above, restart your PC and then select
"Board Setup" in "Sony DVCAP" group so that Sony
DVBK-1000 (or DVBK-IOOOE) Board Setup software
starts. (For details, see "Modifying the hardware
settings" in this page below.)
Click "Manual setting" and select the memory address
used by the capture board.
Then, click [OK],
Example:
When using DOOOOFl to D7FFFF1 for the
DV capture board
Sony DV6K-1000 Board Setup
I/O Port Address:
700H
Memory Address:
O Auto Setting
^ Manual Setting
DOOOOH Q
DOOOOH
4000Q0H
500QOOH
1 6