Sony DVBK-1000 Manuel d'utilisation
Page 15
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
7
Click [OK] after the Sony DVBK-1000 Board Setup
software starts.
The Board Setup automatically detects the selected
I/O port address.
Sony DVBK-1000 Board Setup
rl/0 Port Address;’
700H
Memory Address.
® Auto Setting
O Manual Setting
OK
j DOOOOH PI
Cancel
When "Not enough memory space......" appears
The capture board occupies 32KB of memory space
from memory address DOOOOH. You can change this
setting between following values:
COOOOH to C7FFFH, C8000H to CFFFFH, DOOOOH to
D7FFFH, and D8000H to DFFFFH
Make memory space by one of the following methods:
• When you make setting for the EIVIM386.EXE
Expanded memory manager software in
"config.sys" file
Modify your "config.sys" file using text editor, such
as "Notepad" supplied with Windows.
Example:
When using DOOOOH to D7FFFH for the
DV capture board
DEVICE=C:\DOS\EMM386.EXE(.
)X=D000-D7FF
Add this part.
Other settings which
depends on your system
Drive and path names where the
EMM386.EXE exists.
oaH
I
continued
1 5