Sony MDS-JA50ES - Manuel (Page 31)

Editing Recorded MDs
7 Press YES or AMS if the position is correct.
"Point B Set" appears in the display and playback
for setting the end point of the portion to be erased
(point B) starts.
8
Continue playback until the deck reaches point B,
then press YES or AMS.
"A-B Ers" and "Point B ok?" alternates in the
display while the deck repeats a portion of a few
seconds before point A and after poinj B
successively.
9 Repeat Step 5 if point B is not correct.
10 Press YES or AMS when the position is correct.
"Complete!!" appears for a few seconds and the
portion between point A and B is erased.
To cancel the A-B Erase Function
Press ■.
Note
If "Impossible" appears in the display, the specified portion
cannot be erased. This is due to a technical limitation of the
MD system and is not a mechanical error.
Dividing Recorded Tracks
(Divide Function)
With the Divide Function you can assign a track
number at places that you want to randomly access
afterwards. Use this function to add tracks to MDs
recorded from an analog source (and therefore contain
no track numbers), or to divide an existing track into
multiple portions for locating positions in the middle
of a track. When you divide a track, the total number
of tracks on the MD increases by one and all tracks
following the divided track are renumbered.
Example; Dividing track 2 to create a new track for C
1 2 3
Track
number
Dividing
A
1 2
Track 2 is divided and a
“ new track is created for C
3 |4
A B C D
EDIT/NO YES
KW AMS OW
Dividing a track after selecting the track
1 While the deck is stopped, playing, or pausing,
press EDIT/NO.
2 Turn AMS until "Divide ?" appears in the display
and press AMS.
3 Turn AMS to select the track to be divided and
press AMS.
"-Rehearsal-" appears in the display and the deck
plays back the selected track from the beginning.
\ A \ I T I / / / / /^
" R e h e a r s a l
/ / / / / / M 1 \ \ \ \ \
(Continued)
3V