Sony MDS-JA20ES - Manuel (Page 36)

Controlling a Separately Available Sony CD Changer
When using the coaxial digital connecting cable
MD deck CD changer
, 'I C'lcilfAL OCT ^
' I COA\i»l OPTICAI
|<5>' !^| i| iJfi
DIGITAL
COAXIAL
OUT
■= 1 =^: Signal flow
If "Din Unlock" and "C71" appear in the display
Make sure the optical cable or the coaxial digital
connecting cable is connected properly.
Connecting a control A1 cable to the CD changer
and MD deck
This lets you perform CD synchro-recording and
operate the CD changer using the controls on the MD
deck or the supplied remote (Mega CD Control
Function). Be sure to make connections firmly.
If a component has more than one CONTROL A1 jack,
you can use either one.
MD deck CD changer
s>-
You can connect the cable
to either of the'jacks '
=!^: Signal flow
Notes
_ • When the deck controls the CD changer with a mode
selector, set the selector to CDl.
• If the plugs are not inserted firmly, "No Connect" appears
in the display and you cannot use the Mega CD Control
Function.
Controlling a CD Changer from
the MD Deck (Mega CD Control
Function)
You can operate a Sony CD changer connected with a
control A1 cable using the controls on the MD deck or
the supplied remote.
MEGA CONTROL
©
c5cbO
CD CD ŒJ CD CD
■3-CD-CD<ÍD'S
> 2 5 -
CD-®-® ® ®
@ @ © ®
Number
buttons
1 Turn on the amplifier and set the source selector
to CD.
2 Set INPUT on the deck to the digital input
connector to which the CD changer is connected.
3 Press MEGA CONTROL.
The MEGA CONTROL indicator lights up and the
deck is set to Mega CD Control mode.
4 Press MENU/NO.
The current CD disc number starts flashing in the
display.
5 Turn AMS until the disc number you want
appears, then press AMS (or press the number
buttons and/or >25).
The track number starts flashing.
(Continued)
37^