Dell 5130cdn Color Laser Printer - Manuel (Page 405)

Does this solve your problem? 4.
4
Replace the transfer roller if you have a spare.
1. Replace the transfer roller. See " Replacing the
Transfer Roller ."
2. After you replace the transfer roller, start Tool Box.
For how to start Tool Box, see " Understanding Your
Printer Software ."
The Tool Box opens.
3. Select Chart Print from the left list.
4. Click the Pitch Configuration Chart button.
The Pitch Configuration Chart is printed.
Does this solve your problem?
The task is complete. (The transfer roller you
are using has been damaged. Replace it with a
new one.)
Go to
action
5.
5
Ensure that the belt unit is installed correctly.
Does this solve your problem?
The task is complete.
Go to
action
6.
6
Replace the belt unit if you have a spare.
1. Replace the belt unit. See " Replacing the Belt Unit ."
2. After you replace the belt unit, start Tool Box. For
how to start Tool Box, see " Understanding Your
Printer Software ."
The Tool Box opens.
3. Select Chart Print from the left list.
4. Click the Pitch Configuration Chart button.
The Pitch Configuration Chart is printed.
Does this solve your problem?
The task is complete. (The belt unit you are
using has been damaged. Replace it with a
new one.)
Contact
Dell.
Exit Jam (Exit Sensor Off JAM)
Action Yes No
1
Ensure the fuser is installed correctly.
Does this solve your problem?
The task is complete.
Go to
action
2.
2
Replace the fuser if you have a spare.
1. Replace the fuser. See " Replacing the Fuser ."
2. After you replace the fuser, start Tool Box. For how
to start Tool Box, see " Understanding Your Printer
Software ."
The Tool Box opens.
3. Select Chart Print from the left list.
4. Click the Pitch Configuration Chart button.
The Pitch Configuration Chart is printed.
Does this solve your problem?
The task is complete. (The fuser you are using
has been damaged. Replace it with a new
one.)
Go to
action
3.
Tray 1/Option Tray Multi-feed jam
Action Yes No
1
Ensure that the tray where the multi-feed occurred is inserted
properly.
Does this solve your problem?
The task is
complete.
If using coated paper, go to
action 2.
If using other type of print
media, go to action 3.
2
Load coated paper on the MPF one sheet at a time.
Does this solve your problem?
The task is
complete.
Go to action 4.