Dell 5130cdn Color Laser Printer - Manuel (Page 265)

BS
Backspace 1 character
Option
-d
Enables the short-edge binding feature. When it is specified, the printing direction or position will be adjusted and
both sides of the paper printed so that the shorter edge of the pages can be bound.
-D
Enables the long-edge binding feature. When it is specified, the printing direction or position will be adjusted and
both sides of the paper printed so that the longer edge of the pages can be bound. This option is available only
when the duplexer is installed on the printer.
-I
tray-input
Specifies the paper tray. A paper tray can be selected by directly specifying a tray or by specifying a paper size.
When a paper size is specified, the tray loaded with paper of the specified size will be found and selected
automatically.
The parameters for selecting a paper tray are as follows:
1
Feed paper from tray 1 (top tray).
2
Feed paper from tray 2 (the second tray from the top).
3
Feed paper from tray 3 (the third tray from the top).
4
Feed paper from tray 4 (the fourth tray from the top).
5
Feed paper from tray 5 (the fifth tray from the top).
A4
Feed paper from the tray loaded with A4 (210 x 297 mm).
A5
Feed paper from the tray loaded with A5 (148 x 210 mm).
B5
Feed paper from the tray loaded with B5 (182 x 257 mm).
LT
Feed paper from the tray loaded with Letter (8.5 x 11 inches).
FL
Feed paper from the tray loaded with Folio (8.5 x 13 inches).
LG