Dell 5130cdn Color Laser Printer - Manuel (Page 388)

3. Click the Pitch Configuration Chart button. The Pitch Configuration Chart is printed.
Does this solve your problem?
9
Replace the drum cartridge if you have a spare. See " Replacing the Drum Cartridges ."
1. After you replace the drum cartridge, start Tool Box. For how to start Tool Box, see
" Understanding Your Printer Software ."
The Tool Box opens.
2. Select Chart Print from the left list.
3. Click the Pitch Configuration Chart button. The Pitch Configuration Chart is printed.
Does this solve your problem?
The task
is
complete.
Contact
Dell.
Toner smears or print comes off.
Action Yes No
1
Check if the envelope lever of the printer is lifted when you
print on plain paper.
If so, change it to the plain paper mode.
For more information on how to change the mode, see
" Loading an Envelope in the MPF ."
Then raise the fixing temperature by turning up the value of
the Adjust Fuser of the Dell Configuration Web Tool.
NOTE: When you use the optional output expander, check if
the lever of the output expander is pulled down (normal
mode).
For more information on how to change the mode, see
" Loading Print Media ."
Does this solve your problem?
The task is complete.
Go to
action
2.
2
The print media surface may be uneven. Try changing the
Paper Type setting in the printer driver. For example, change
the plain paper to plain thick.
1. On the Paper/Output tab, change the Paper Type
setting.
Does this solve your problem?
The task is complete.
Go to
action
3.
3
Verify that the correct print media is being used. See
" Supported Paper Sizes ." If not, use the print media
recommended for the printer.
Does this solve your problem?
The task is complete.
Go to
action
4.
4
Replace the drum cartridge if you have a spare.
1. Replace the drum cartridge. See " Replacing the Drum
Cartridges ."
2. After you replace the drum cartridge, start Tool Box. For
how to start Tool Box, see " Understanding Your Printer
Software ."
The Tool Box opens.
3. Select Chart Print from the left list.
4. Click the 4 Colors Configuration Chart button. The 4
The task is complete. (The drum cartridge
you are using has been damaged. Replace
it with a new one.)
Go to
action
5.