Dell 5130cdn Color Laser Printer - Manuel (Page 218)

Back to Contents Page
Using Digital Certificates
Managing Certificates
Setting the Features
The authentication feature using digital certificates upgrades security when sending print data or setting data.
This chapter describes how to manage digital certificates as follows.
" Importing a Digital Certificate "
" Setting a Digital Certificate "
" Confirming the Settings of a Digital Certificate "
" Deleting a Digital Certificate "
" Exporting a Digital Certificate "
NOTE: The external certificate management described above is enabled only when the optional hard disk is
installed and is set to On for Encryption.
NOTE: For information about digital certificate error, see " Understanding Printer Messages " and " Digital Certificate
Problem ."
Managing Certificates
Preparing
Changing Encryption Setting
Some items are effective only when On is selected for Encryption. Change the encryption setting to On and set a key that
is required to encrypt, if necessary.
NOTICE: All files stored on the optional hard disk are cleared when changing the encryption setting.
NOTE: You can enter only characters from 0 to 9, a to z, A to Z, and NULL values for encryption key.
When Using the Operator Panel
1. Press Menu button.
2. Press button until Admin Menu is highlighted, and then press (Set) button.
3. Press button until System settings is highlighted, and then press (Set) button.
4. Press button until Data Encryption is highlighted, and then press (Set) button.
5. Encryption is displayed. Press (Set) button.
6. Press button until On is highlighted, and then press (Set) button.
7. The cursor is located at the first digit of the encryption key. Press or button to enter the numbers for the
encryption key.