Sony TA-VA80ES - Manuel (Page 26)

26 EN
Additional Information
Specifications
Amplifier section
POWER OUTPUT
Stereo mode
(4 ohms at 1 kHz THD 0.7%)
100 W + 100 W
Surround mode (4 ohms at 1 kHz THD 0.7%)
Front: 100 W + 100 W
Center
1) : 100 W
Rear 1) : 100 W + 100 W
1) Depending on the sound field settings and the
source, sound will not be output.
Frequency response
PHONO: RIAA equalization curve
±0.5 dB
CD, TAPE, DAT/MD, TUNER, VIDEO 1, 2:
10 Hz - 50 kHz +0
–1
dB (with DIRECT PASS on)
Inputs
Digital signal processor section
Modulation (A/D conversion)
High Density Linear Converter
Demodulation (D/A conversion)
High Density Linear Converter (Advanced pulse
D/A converter)
Sampling frequency
48 kHz
Surround LFE MIX: MUTE, –20 - 0 dB, 0.5 dB step
D. COMP: OFF, 0.1 - 0.9, STD, MAX
REAR level: –20 - +10 dB, 0.5 dB step
CENTER level: –20 - +10 dB, 0.5 dB step
SUB WOOFER level: –20 - +10 dB, 0.5 dB step
EFFECT: 21-step adjustable
WALL: 17-step adjustable
SEAT F/R: 17-step adjustable
SEAT L/R: 17-step adjustable
REVERB time: 17-step adjustable
Depending on the sound field, some parameters
may not be adjustable (see page 21).
Equalizer BAND: BASS/TREBLE
Turnover frequency:
Bass: 99 Hz - 992 Hz
Treble: 1.0 kHz - 8.6 kHz
Level: ±10 dB, 0.5 dB step
Video section
Inputs 1 Vp-p 75 ohms
Outputs 1 Vp-p 75 ohms
General
System Preamplifier section:
Low-noise NF type equalizer
Power amplifier section:
Pure-complementary SEPP
Power requirements
230 V AC, 50/60 Hz
Power consumption
380 W
AC outlets 1 switched, maximum
100 W
Dimensions 430 Ч 160 Ч 435 mm including projecting parts and
controls
Mass (Approx.) 15.6 kg
Supplied accessories
See page 4.
Design and specifications are subject to change without
notice.
Impedance
S/N (weighting
network, input
level)
Sensitivity
PHONO
2) ’78 IHF
2.5 mV 50 kilohms
75 dB 2)
(A, 2.5 mV)
82 dB 2)
(A, 150 mV)
50 kilohms 150 mV
TAPE, DAT/MD, CD,
TUNER, VIDEO 1, 2, 3,
LD, TV
LD AC-3 RF
LD/TV/CD/DAT MD
OPTICAL
—
—
75 Ω
—
100 dB
(A, 20 kHz LPF)
100 dB
(A, 20 kHz LPF)
LD COAXIAL 0.5 Vp-p 75
Ω
100 dB
(A, 20 kHz LPF)
Outputs VIDEO 1, 2 AUDIO OUT:
Voltage: 150 mV
Impedance: 10 kilohms
PRE OUT:
Voltage: 2 V
Impedance: 1 kilohms
PHONES:
Accepts low and high impedance headphones
BASS BOOST +6 dB at 70 Hz