Fulgor Milano Sofia Series 36 Inch Induction Freestanding Pro-Range Use and Care Manuals - Manuel (Page 20)

EN
16
10 - Timed Oven Mode Operation
• Be sure that the time-of-day clock is displaying the correct
time.
• The timed mode turns off the oven at the end of the cook
time.
To Set a Timed Mode
1. Select the cooking mode and the temperature by means of
the knobs. The “ON” writing will appear in the display.
2. Touch TIME key until the “TIME” text appears in the display.
3. Touch + or - , the hour digits will begin flashing.
Continue to set the desired cooking time. Keep in mind that
the time required for the oven to reach the temperature must
be included in the set cooking time.
4. Touch TIME again, the hours will be confirmed and the
minute digits will begin flashing.
5. Touch + or - to change the minutes. Hold the key to
change by 10 minutes steps. Continue to set the desired
cooking time.
6. Touch TIME once again or wait for a few seconds to confirm
the cooking time value.
To Delay the Start of a Timed Mode
Follow steps 1 through 6 or 7 above.
• Touch TIME key until “STOP TIME” will appear in the display.
• The control automatically calculates and displays the initial
value, adding the cooking time already set to the time of day.
• Touch + or - , the hour digits will begin flashing. Continue
to set the desired stop time.
• Touch TIME again, the hours will be confirmed and the
minute digits will begin flashing.
• Touch + or - to change the minutes. Hold the key to
change by 10 minutes increments. Continue to set the
desired stop time.
• Touch TIME once again or wait for a few seconds to confirm
the stop time value.
• The clock automatically calculates the time of day at which
the mode starts and stops. The “DELAY” writing is displayed
until the starting time is reached.
When a Timed Mode is running
• As soon as the oven begins cooking, the display shows the
cooking time and counts down by one minute increments.
The oven will cook for the programmed time.
• When the time expires, the oven automatically turns off,
the texts “ON” and “TIME” start flashing and an “end of
activity” beep sequence sounds. Reminder beeps will sound
for up to fifteen minutes or until any key is touched in order
alert the user that cooking is complete.
How to check a time value
• Whenever it’s necessary to check a time value that is not
displayed, touch the TIME key until the desired text is
displayed. The value will be shown for 5 seconds.
• Example: if the timer value is displayed and you want to
check the cooking time, touch the TIME key until “TIME” is
displayed to view the cooking time for 5 seconds.