Honeywell 10,000 BTU Portable Air Conditioner User Manual - Manuel (Page 18)

10
Timer / Temperature Set Control
In timer mode, press and
to adjust the time setting for 1
hour intervals.
Timer setting is available from
1 - 24 under cooling mode,
press
and to up or down
the temperature.
EN
USE AND OPERATION (CONTINUED)
REMOTE CONTROL
All key functions can be accessed from the remote control.
Use only two AAA or IEC R03 1.5V batteries.
Remove the batteries if the remote control is not in use for a month or longer.
All batteries should be replaced at the same time, do not mix with old batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
Properly dispose of used batteries. •
•
•
•
•
Caution:
Swing Control
LED Display Control
Fan Speed Control
ON / OFF
Press to switch ON/OFF the
front panel LED display
• HIGH • MED • LOW
Note:
Battery Installation: Remove the cover on the back of the remote control and insert two AAA
batteries with + and - pointing in the proper direction according to the polarity markings. •
•
•
Press to switch temperature between
Centigrade and Fahrenheit.
ON / OFF
°C / °F Control
Sleep Control
Power Control
ON / OFF
Cooling
Heating*
Dehumidifying
Fan
Press to change the operation mode
in the order of:
Mode Control
*Applicable for models with Heating feature only.