40094-e54 pg10 (en) rev d (a4), Pellet hopper clean out, Maintenance – Broil King Crown Crown™ 500 Freestanding Smart Wood Pellet Grill Owner's Manual Manuel d'utilisation

Page 10: Grease clean out, Ash clean out, Disposal of ashes, Care and maintenance

Advertising
background image

MAINTENANCE

10

PELLET HOPPER CLEAN OUT

Your Broil King

®

Pellet Grill has a hopper clean out system

designed for easy removal of excess fuel to quickly change pellet

flavors or clean out remaining pellets after use.

GREASE CLEAN OUT

Grease fires are caused by not properly maintaining the grill and

failing to clean the grease management system on a consistent

basis. In the unlikely event of a grease fire while cooking, turn

off / unplug the appliance and keep the lid closed until the fire is

completely out. Never keep the lid open during a grease fire.

ASH CLEAN OUT

After each cook out wait for the grill to completely cool before

removing and emptying the Ash Tray. First step is to open the

agitator to the unlock position indicated on the cover. You can

slide the Agitator between lock and unlock to help ash fall into

the tray. Only dispose ashes which are completely cool and

extinguished.

Return the Agitator to the closed position before using the grill

again.

DISPOSAL OF ASHES

Ashes should be placed in a metal container with a tight-fitting lid.

The closed container of ashes should be placed on a

noncombustible floor or on the ground, well away from all

combustible materials, pending final disposal. If the ashes are

disposed of by burial in soil or otherwise locally dispersed, they

should be retained in the closed container until all cinders have

thoroughly cooled."

CARE AND MAINTENANCE

The Broil King

®

Pellet Grill will give you many years of great

service with minimal care. The seasoning process will help

preserve the internal steel components. Use a stainless steel

brush to clean cooking grids and components that are soiled.

It may be necessary to clean and re-season your cooking grids.

Brush them thoroughly with a Broil King

®

(#64014) stainless steel

grill brush to remove any debris and apply a thin layer of a high

smoke point oil. Then, place the cooking grids into your grill, and

cook at 400°F (205°C) for 1 hour. Repeat as desired. This coating

of oil will protect your cooking grids and provide years of trouble

free use.

Clean the exterior using warm, soapy water.

To clean the interior, use a Broil King

®

(#65641) wire-bristle grill

brush to remove any debris from the cook box. The layer of oils

that accumulates inside the smoker – the seasoning – is

protective and does not need to be scrubbed clean with any

frequency.

Always keep your Broil King

®

Pellet Grill covered when not in

use - use Broil King

®

grill cover #67066 for the Crown Pellet 500

(Model #494051) or grill cover #67064 for the Crown Pellet 400

(Model #493051)

Advertising