Asus ROG GT-AX11000 Tri-Band Wi-Fi Gaming Router - Manuel (Page 71)

71
• DTIM Interval : DTIM (Delivery Traffic Indication Message)
Interval or Data Beacon Rate is the time interval before a
signal is sent to a wireless device in sleep mode indicating
that a data packet is awaiting delivery. The default value is
three milliseconds.
• Beacon Interval : Beacon Interval is the time between one
DTIM and the next. The default value is 100 milliseconds.
Lower the Beacon Interval value for an unstable wireless
connection or for roaming devices.
• Enable TX Bursting : Enable TX Bursting improves
transmission speed between the wireless router and 802.11g
devices.
• Enable WMM APSD : Enable WMM APSD (Wi-Fi Multimedia
Automatic Power Save Delivery) to improve power
management between wireless devices. Select Disable to
switch off WMM APSD.
• Reducing USB 3.0 interference : Enable this function
ensures the best wireless performance on the 2.4 GHz band.
Disabling this feature increase USB 3.0 port’s transmission
speed and may affect the 2.4 GHz wireless range.
• Optimize AMPDU aggregation : Optimize the max number
of MPDUs in an AMPDU and avoid packets get lost or
corrupted during transmission in error-prone wireless
channels
• Optimize ack suppression : Optimize the max number of
ack to suppress in a raw.
• Turbo QAM : Enable this function allows to support 256-QAM
(MCS 8/9) on the 2.4GHz band to achieve better range and
throughput on that frequency.
• Airtime Fairness : With airtime fairness, the speed of
the network is not determined by the slowest traffic. By
allocating time equally among clients, Airtime Fairness allows
every transmission to move at its highest potential speed.