Labconco Protector Stainless Steel Radioisotope Laboratory Fume Hoods 1208 Series - Manuel (Page 7)

Chapter 1: Introduction
Product Service 1-800-522-7658 3
Original instructions
Chapter 3: Getting Started contains the information you need to properly unpack,
inspect, install, and certify your laboratory fume hood.
Chapter 4: Performance Features and Safety Precautions explains how the
Protector operates and the appropriate precautions you should take when using the
fume hood.
Chapter 5: Using The Protector Radioisotope discusses the basic operation of
your fume hood. Information on how to prepare, use and shut down your
Protector Hood are included.
Chapter 6: Maintaining The Protector Radioisotope explains how to perform
routine maintenance on your fume hood.
Chapter 7: Modifying The Protector Radioisotope explains how to modify the
fume hood or add accessories.
Chapter 8: Troubleshooting contains a table of problems you may encounter
while using your laboratory fume hood including the probable causes of the
problems and suggested corrective actions.
Appendix A: Protector Radioisotope Components contains labeled diagrams of all
of the components of the fume hoods.
Appendix B: Protector Radioisotope Dimensions contains comprehensive
diagrams showing all of the dimensions for the laboratory fume hoods.
Appendix C: Protector Radioisotope Specifications contains the electrical
requirements for laboratory fume hood. Wiring diagrams are also included.
Appendix D: Serial Number Tag Description provides current rating code used on
serial number tag.
Appendix E: References lists the various resources available that deal with
laboratory fume hoods.
Typographical Conventions
Recognizing the following typographical conventions will help you understand
and use this manual:

Book, chapter, and section titles are shown in italic type (e.g., Chapter 3:
Getting Started).

Steps required to perform a task are presented in a numbered format.

Comments located in the margins provide suggestions, reminders, and
references.