Levana LV-TW501 - Manuel (Page 17)

17
PAIRING THE DEVICES
The camera and monitor come paired (connected) together. If you do
receive this package and the devices do not automatically connect and
transmit, you may do so manually.
1. Slide the power switch on the right hand side of the camera to the OFF position.
2. Cover the light sensor on the front of the camera
with your finger or a cloth.
3. Slide the power switch on the camera to
the ON position.
4. With the monitor switched on, press and hold the
play/pause button for two seconds.
5. The pair icon will appear on the screen
and the power LED on the camera will blink for a few seconds.
6. Press the menu button on the monitor to confirm the setting.
7. C1... OK! will appear when the camera and monitor are paired successfully and then the video
and audio will be transmitted automatically.
Note: If “C1...X” appears (pair failed) instead of “C1...OK!” you will have to remove all sources
of power from the camera and monitor and start the pairing process over again.
Light Sensor