Levana LV-TW501 - Manuel (Page 15)

15
Adjusting the VOX* Sensitivity
VOX = Voice Operated Transmission = Sound Detection
The VOX function causes the camera to transmit video and audio immediately after a sound is heard.
Once transmission begins, the video will play for 10 seconds if no more noise is heard. Pressing a
button on the monitor will also turn the screen and transmission ON at any time.
Setting the sensitivity of the VOX function will affect how easily the video will be transmitted, one
bar will require much louder sounds being detected before transmission will begin, than the five
bar setting requires.
1. Press the menu button five times.
2. The VOX icon will display on the screen along with the current status of the function,
either OFF or a gauge indicating the current
sensitivity, 1-5.
3. Use the up and down buttons on the left side of the monitor to turn the VOX function
OFF or adjust the sensitivity up and down. One bar being the lowest and five bars being the
highest sensitivity.
Selecting a Lullaby
1. Press the play/pause button on the right hand side of the monitor once.
2. The lullaby icon will appear on the monitor screen, and the last played lullaby will start
to play.
3. Press the lullaby button on the right side of the monitor to select one of five lullabies
to play.
4. Press the up and down volume buttons during playback to adjust the volume of the
music.
MONITOR OPERATION
Note: If no number is displayed beside the lullaby icon, all five lullabies will play one after
another until the play/pause button is pressed again.