Levana LV-TW501 - Manuel (Page 11)

11
Using the Rechargeable Battery
1. Turn the belt clip on the back of the monitor unit, upwards.
2. Remove the battery compartment cover by sliding it down off
the back of the monitor
3. Insert the included rechargeable battery, plug the battery cord
in to the small jack on the inside of the battery compartment.
Attaching Power to the Charging Base
1. Connect the AC adapter to the charging base as shown in the diagram.
2. Connect the small end into the DC Jack on the back of the charging base, connect the other end
of the adapter into an available wall outlet.
3. For safety reasons, use ONLY the adapters included in the package.
Charging the Monitor and Rechargeable Battery
1. To charge the battery in the monitor unit, place the monitor frontwards onto the charging dock
once the power adapter has been attached.
2. The power LED will light up red to indicate that the battery is being charged.
3. For safety reasons, use ONLY the adapters included in the package.
↑
Note: When the battery in the monitor is low battery, the power LED will flash slowly,
recharging the battery will be required shortly after.
SETTING UP YOUR SYSTEM